Descriere produsComentarii (0) Caracteristici tehnice: Amplificator Alpine BBX-F1200 Instalare Terminal Layout: Two-Sided Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals Generale Amplifier Type: Class-A/B Channel Design: 4/3/2 Channel Thermal Control: Thermal Management Control Power Supply: DC-DC PWM Power Supply Power Supply Design: MOSFET Power Current Protection: Over-Current, Over-Voltage and Thermal Protection Crossover: Variable Low-Pass / High-Pass Green/red status LED 2 pair RCA pre-inputs   Putere Maxima Total Max Power: 600W Putere RMS Per Channel into 4ohms (≤1%THD+N): 4 x 50W Per Channel into 2ohms (≤1%THD+N): 4 x 70W Bridged into 4ohms (≤1%THD+N): 2 x 130W Reglare sunet Crossover Frequency (Variable, OFF/LPF/HPF Selectable) 1/2 Ch: LP/HP:  50Hz – 500Hz 3/4 Ch: LP/HP:  50Hz – 500Hz EQ (Equalizer): Bass EQ Fixed Frequency 45 Hz, Q=0.5, Variable Gain  0dB to +12dB (3/4 Ch only) Dimensiuni Footprint: 330 mm x 52 mm x 240 mm Generale Power Requirements: 14.4 V DC (11 V to 16 V) Input Sensitivity: 0.2 - 8.0 V Frequency Response: 5 Hz - 50 kHz (+ 0,-3 dB) Speaker Impedance: 4 or 2 Ω Signal to Noise: S/N Ratio (IHF A Weighted, Reference: rated power into 4ohms) 95 dB Weight: 2.7 Kg Scrie o recenzie Amplificator Alpine BBX-F1200 Nota (0.0) bazata pe 0 aprecieri ( Scrie o recenzie

Descriere produsComentarii (0) Caracteristici tehnice: Amplificator Alpine BBX-T600   Instalare Terminal Layout: Two-Sided Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals Generale Amplifier Type: Class-A/B Channel Design: 2/1 Channel Thermal Control: Thermal Management Control Power Supply: DC-DC PWM Power Supply Power Supply Design: MOSFET Power Current Protection: Over-Current, Over-Voltage and Thermal Protection Crossover: Variable Low-Pass / High-Pass Green/red Status LED 1 pair RCA pre-inputs 1 pair RCA pre-outputs   Putere Maxima Total Max Power: 300W   Putere RMS Per Channel into 4ohms (≤1%THD+N): 2 x 50W Per Channel into 2ohms (≤1%THD+N): 2 x 70W Bridged into 4ohms (≤1%THD+N): 1 x 130W Reglare sunet Crossover Frequency (Variable, OFF/LPF/HPF Selectable) 1/2 Ch: LP: 50Hz – 250Hz   HP: 80Hz  – 1.2kHz EQ (Equalizer): Bass EQ Fixed Frequency 45 Hz, Q=0.5, Variable Gain  0dB to +12dB Dimensiuni Footprint: 250 mm x 52 mm x 240 mm Generale Power Requirements: 14.4 V DC (11 V to 16 V) Input Sensitivity: 0.2 - 8.0 V Frequency Response: 5 Hz - 50 kHz (+ 0,-3 dB) Speaker Impedance: 4 or 2 Ω Signal to Noise: S/N Ratio (IHF A Weighted, Reference: rated power into 4ohms) 95 dB Weight: 1.9 Kg Scrie o recenzie Amplificator Alpine BBX-T600 Nota (0.0) bazata pe 0 aprecieri ( Scrie o recenzie

Aparatul pentru detrartraj Piezon 150 foloseste tehnologia EMS "Original Piezon Method", o tehnologie eficace, eficienta si intuitiva. Impreuna cu gama de instrumente Swiss InstrumentsPM, aplicatiile sunt virtual nelimitate: de la tratamente profilactice la tratamente parodontale si pana la mentenanta implantologica. Noua piesa de mana Unibody asigura robustete si un camp vizual mai bun in timpul tratamentului si este sterilizabila pana la 135 C. Avantaje: Control precis, manual,  cu 35 de trepte pentru reglarea fara efort a puterii Performanta ridicata si siguranta in timpul tratamentelor Date tehnice: Clasificare EN 60601-1 - clasa II Voltaj - 100-240 VAC / 50-60 Hz Consum - 50VA Frecventa - 24-32 kHz Alimentare cu apa: irigare externa, conectare la conducta cu apa Greutate: 0.6kg Dimensiuni (HxWxD): 92 x 168 x 144mm Conditii de operare: de la +10°C la +40°C, umiditate relativa 30%-75% Conditii de imagazinare si transport: -10°C - +40°C, umiditate relativa 10% - 95%, presiune pneumatica 500 hPa - 1060 hPa Putere ultrasonica: 8W Frecventa de operare 24-32 KHz Prezentare: 1 piesa de mana Original Piezon, fara LED 3 EMS Swiss InstrumentsPM A, P, PS – fiecare in CombiTorque® 2 filtre apa, externe 1 cablu pentru piesa de mana