Boxe wireless Audio Pro Living LV1 TX Seria Living vine pe piata de Hi-Fi cu un concept nou, oferind solutia unui sistem de sunet de inalta rezolutie fara existenta unui setup complicat. Tot ce aveti nevoie este un PC sau o alta sursa de muzica, iar conexiunea este wirelees. The perfect loudspeaker for small and medium size rooms. Reproduces stereo image sound from a single box thanks to vare Embracing Sound technology. The sound from LV1 is powerful and in very good sound quality. With LV1 you can easily add wireless sound in your kitchen or bedroom. Designed as a small and flat speaker system which is very easy to place. Can also be wallmounted. Living LV1 is available with and without TX100 transmitter. If you already own other LV speakers, LV1 with automatically join your existing Audio Pro network. LV1 can be combined with all speakers from the Living series. Choose between white,red or black leather finish. Large display shows all settings clearly (volume, channel, and zone) Type:  Powered wireless loudspeaker system with DSP, Embracing Sound technology  Amplifier:  4 x 35W digital Class D Adaptive biquad coefficients for EQ and DRC filters. Thermal and short-circuit protection. Tweeter: 2 x 1” soft dome Woofer: 2 x 3.5” Frequency range: 50 – 22.000Hz Crossover frequency (digital): 2000Hz (24dB/octave L/R) Features:  - Superior high end sound, tailormade digital amplifiers - Built-in wireless receiver in each speaker - Luxorious encasing in white or black leather - Wireless full CD quality sound - Remote control for master and zone volume - Easy setup, get wireless music in seconds - Wireless range room to room: Up to 20 meters - Wireless range same room: Up to 50 meters - Wireless range open field: Up to 100 meters - No interference or audible delays - Works with both Mac and PC - Plug ‘n play, no software needed - Extensive multiroom possibilities - RF band: 2.4GHz - Sample rate: 48 KHz - Dedicated proprietary protocol network  Dimensions HxWxD: 220x300x100 mm

Descriere produsComentarii (0) Caracteristici tehnice: Amplificator Alpine BBX-F1200 Instalare Terminal Layout: Two-Sided Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals Generale Amplifier Type: Class-A/B Channel Design: 4/3/2 Channel Thermal Control: Thermal Management Control Power Supply: DC-DC PWM Power Supply Power Supply Design: MOSFET Power Current Protection: Over-Current, Over-Voltage and Thermal Protection Crossover: Variable Low-Pass / High-Pass Green/red status LED 2 pair RCA pre-inputs   Putere Maxima Total Max Power: 600W Putere RMS Per Channel into 4ohms (≤1%THD+N): 4 x 50W Per Channel into 2ohms (≤1%THD+N): 4 x 70W Bridged into 4ohms (≤1%THD+N): 2 x 130W Reglare sunet Crossover Frequency (Variable, OFF/LPF/HPF Selectable) 1/2 Ch: LP/HP:  50Hz – 500Hz 3/4 Ch: LP/HP:  50Hz – 500Hz EQ (Equalizer): Bass EQ Fixed Frequency 45 Hz, Q=0.5, Variable Gain  0dB to +12dB (3/4 Ch only) Dimensiuni Footprint: 330 mm x 52 mm x 240 mm Generale Power Requirements: 14.4 V DC (11 V to 16 V) Input Sensitivity: 0.2 - 8.0 V Frequency Response: 5 Hz - 50 kHz (+ 0,-3 dB) Speaker Impedance: 4 or 2 Ω Signal to Noise: S/N Ratio (IHF A Weighted, Reference: rated power into 4ohms) 95 dB Weight: 2.7 Kg Scrie o recenzie Amplificator Alpine BBX-F1200 Nota (0.0) bazata pe 0 aprecieri ( Scrie o recenzie

Descriere produsComentarii (0) Caracteristici tehnice: Amplificator Alpine BBX-T600   Instalare Terminal Layout: Two-Sided Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals Generale Amplifier Type: Class-A/B Channel Design: 2/1 Channel Thermal Control: Thermal Management Control Power Supply: DC-DC PWM Power Supply Power Supply Design: MOSFET Power Current Protection: Over-Current, Over-Voltage and Thermal Protection Crossover: Variable Low-Pass / High-Pass Green/red Status LED 1 pair RCA pre-inputs 1 pair RCA pre-outputs   Putere Maxima Total Max Power: 300W   Putere RMS Per Channel into 4ohms (≤1%THD+N): 2 x 50W Per Channel into 2ohms (≤1%THD+N): 2 x 70W Bridged into 4ohms (≤1%THD+N): 1 x 130W Reglare sunet Crossover Frequency (Variable, OFF/LPF/HPF Selectable) 1/2 Ch: LP: 50Hz – 250Hz   HP: 80Hz  – 1.2kHz EQ (Equalizer): Bass EQ Fixed Frequency 45 Hz, Q=0.5, Variable Gain  0dB to +12dB Dimensiuni Footprint: 250 mm x 52 mm x 240 mm Generale Power Requirements: 14.4 V DC (11 V to 16 V) Input Sensitivity: 0.2 - 8.0 V Frequency Response: 5 Hz - 50 kHz (+ 0,-3 dB) Speaker Impedance: 4 or 2 Ω Signal to Noise: S/N Ratio (IHF A Weighted, Reference: rated power into 4ohms) 95 dB Weight: 1.9 Kg Scrie o recenzie Amplificator Alpine BBX-T600 Nota (0.0) bazata pe 0 aprecieri ( Scrie o recenzie